Lumberjack Bandsaw BS254 Professional 254mm 10" Tilt Table Woodworking

Characteristics

• Huge cutting depth capability of 6 '' / 150mm
• 10 '' / 254mm Cutting width (groove)
• Precision cast iron work table
• Silent induction motor --- LED powered work light
• Built-in dust collection tray ----

Product Description
Compact woodworking band saw with a huge cutting capacity, for a machine of this size and price, 150 mm (6 ") .Its large capacity makes it an ideal choice for carpenters who lack Space is delivered by a silencer Asynchronous motor with belt drive on the wheel of the band saw The key to a straight and precise cut on a band saw is to have a good set of blade guides The B250 has three bearings sealed on the blade guard, two mounted laterally on the blade The rear bearing takes the thrust of the back of the blade allowing it to work freely.The same configuration is then repeated under the table The cast iron table tilts from 90 to 45 degrees, a positive stop at these two positions, any angle between the two can be raised and locked.For the cuts, the guide can be located on each side of the blade and can to be lock in a single press on the lever and has a clear marker to set agai Nst the metric scale. The fence itself can be installed in two ways. When cutting thicker materials, the total face height of 60 mm is used. When cutting thin and narrow strips, the guide is equipped with the small face against the blade to allow clearance around the guides. Both doors are equipped with safety locks that shut off engine power when the doors are open for changing or cleaning the blade. A dust collector is always recommended when using a band saw. The dust extraction outlet has 3 rings that allow it to accept 3 pipe sizes, 50mm diameter, 75mm and 100mm, making it compatible with any type of suction system. However, if the extraction is not used, the band saw is equipped with an integrated suction system. Dust falling in the base of the machine will be collected here, allowing it to be emptied quickly and easily. Maximum cutting depth - 150 mm (6 ") Throat width - 245 mm (10") Table height - 360 mm x 320 mm Table tilt - 90-45 degrees Cutting speed 400 amps